Rockford Fosgate P2D4-10 Punch Series 10" 600W Peak Power Handling at 4 Ohms, Dual Voice Coil Component Car Subwoofer
We are a Rockford Fosgate authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • (1) 10" Dual 4-ohm voice coil subwoofer
- • Trim ring
- • (8) 1-1/8" Allen head screws
- • 4mm Allen head bit
- • Owner's Manual
Why Choose Rockford Fosgate P2D4-10 Component Car Subwoofer?
Clean Bass That Hits Hard and Stays Controlled
The Rockford Fosgate Punch P2D4-10 is built for people who want real bass performance without the mess. With CEA-2031 compliant power handling, it delivers tight, accurate low-end sound that can handle continuous power without distortion or strain. That means you get consistent bass response whether you’re cruising or pushing your system harder for longer sessions.
Flexible Wiring That Fits Your Setup
Thanks to its dual 4 Ohm voice coils, this sub gives you solid wiring flexibility to match your system goals. You can wire it for a 2 Ohm load in parallel for more output or an 8 Ohm setup in series for different amplifier compatibility. It makes system building easier and gives you more control over how your bass performs.
Built Tough for Long-Term Bass Performance
This subwoofer is designed to take abuse and keep going. The StampCast steel frame keeps everything rigid and stable, while the Kevlar fiber-reinforced paper cone and Santoprene surround handle heavy movement without breaking down. Add in the anodized aluminum voice coil former and spider venting, and you’ve got a sub that stays cool, strong, and reliable even when the bass keeps hitting.
Frequently Asked Questions (FAQ)
- • Why is the bass weaker than expected?
Check the enclosure, amplifier settings, polarity, and wiring. An incorrect box or weak signal can reduce the overall bass response.
- • How should I wire the dual voice coils?
Both coils should be wired correctly. Parallel wiring creates a lower final impedance, while series wiring creates a higher impedance.
- • What amplifier power should I use?
Choose an amplifier that matches the subwoofer's RMS rating and final impedance. Set the gain carefully for clean, reliable performance.
- • Why does it sound weak on deep bass?
Enclosure volume and tuning affect low-frequency response. Make sure the enclosure is properly designed for the subwoofer's specifications.
- • Why does the bass distort at higher volume?
Clipping, excessive gain, or an unsuitable amplifier can cause distortion. Lower the gain and check the amplifier settings.
- • Can the voice coils be wired to separate amplifier channels?
Use one suitable amplifier channel and wire both coils for the correct final impedance. This provides more predictable power delivery.
- • Why does the cone move but produce little bass?
Check polarity, enclosure sealing, and crossover settings. Incorrect phase or air leaks can greatly reduce low-frequency output.
- • Why does it make a buzzing or rattling noise?
Check the mounting hardware, enclosure, terminals, and nearby panels. Loose parts can vibrate when the bass gets stronger.
- • Why does it get hot when played loudly?
Some warmth is normal, but excessive heat can indicate overdriving. Lower the gain and volume if the voice coil becomes unusually hot.
- • What should I check if it suddenly stops working?
Inspect the amplifier, wiring, terminals, voice coils, and fuse. Verify the audio signal before assuming the subwoofer has failed.
- Diameter : 10 Inch
- Sensitivity : 84 dB
- Impedance : 4 Ohm
- Frequency Response : 30-250 Hz
- Peak Power Handling : 600 Watts
- Top Mount Depth : 5-15/16 Inches
- Shallow Mount : No Inch
- Number of Voice Coils : Dual
- Suggested Sealed Box Volume : 0.85 Cubic ft.
- Suggested Ported Box Volume : 1.4 Cubic ft.
- RMS Power Handling : 300 Watts
Features:
- Controlled Low-End Performance with Reliable Power Handling: The Rockford Fosgate Punch P2D4-10 10-inch subwoofer delivers tight and accurate bass response with CEA-2031 compliant power handling, ensuring it can sustain continuous power without distortion or coil stress, making it ideal for dependable daily car audio performance.
- Dual 4 Ohm Voice Coil Flexibility for System Tuning: Featuring dual 4Ω voice coils, the P2D4-10 allows versatile wiring configurations including 2Ω parallel or 8Ω series setups, giving you the flexibility to match different amplifier requirements and fine-tune system output.
- Rigid StampCast Steel Frame with Precision Fit Design: The heavy-duty StampCast steel basket enhances structural stability while the FlexFit mounting system allows slight alignment adjustments during installation, ensuring a secure fit and improved enclosure integration.
- Durable Cone Assembly with Efficient Thermal Management: Built with a Kevlar fiber reinforced paper cone, Santoprene surround, anodized aluminum voice coil former, and spider venting, the subwoofer is engineered to deliver strong bass output while maintaining heat control and long-term durability under demanding use conditions.
Specifications:
- Size: 10 -inch
- Impedance (Ohms): 2, 8
- Cone Material: Kevlar reinforced paper
- Surround Material: Santoprene
- Ideal Sealed Box Volume (cubic feet): 0.59
- Ideal Ported Box Volume (cubic feet): 1.4
- Port diameter (inches): 4
- Port length (inches): 14
- Free-Air: No
- Dual Voice Coil Yes
- Sensitivity: 84 dB at 1 watt
- Frequency Response: 31 - 250 Hz
- Max RMS Power Handling: 300
- Peak Power Handling (Watts): 600
- Top Mount Depth (inches): 5 15/16
- Bottom Mount Depth (inches): N/A
- Cutout Diameter or Length (inches): 9
- Vas (liters): 35.4
- Fs (Hz): 30.8
- Qts: 0.57
- Xmax (millimeters): 10
- UPC: 780687332686
- Weight: 14
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
Do you own this product?
Write a review!
-
I have always been a man of Audio Bahn and JL audio but this time around I was convinced to try RF. I bought a P2D4-10 and a P 300x1. I built a custom box for my truck using the box wizard on rockfordfosgate. This small 300 RMS setting is AMAZING for what it is. I previously had a 800rms audiobahn 12 with a 1000rms crunch amp and this destroys it! The amps birth certificate rates it at 455RMS @ 2ohms.Amazing quality for the money!!!
-
One of best speakers from fosgate and at a great price from online car stereo!
-
It hits hard . It is also one of the best looking subs I've ever seen
